FFConfigLite

Diagnose and configure modules in your Ford Focus 2 or C-Max I with ease. Connecting via ELM327 or ELS27 provides CAN-bus access to a range of critical systems:

Engine Control Module (ECM):

Access comprehensive information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM) for the following engines: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Cluster (Dashboard):

Retrieve module information, read and clear DTCs, configure settings, reboot the module, and adjust or correct odometer readings*.

Brake Control Module (BCM):

Access module information, read and clear DTCs, configure settings, reboot the module, reset the Dynamic Stability System (DDS) calibration, and perform brake bleeding*.

Body Control Module (BCM):

Retrieve module information, read and clear DTCs, configure settings*, and reboot the module.

Airbag Control Module (ACM):

Access module information, read and clear DTCs, configure settings, reboot the module, and clear crash data*.

Transmission Control Module (TCM):

Access module information, read and clear DTCs, and reset the KAM*.

Climate Control Module (CCM):

Retrieve module information, read and clear DTCs.

Audio Control Module:

Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features require the full version of the software.

To unlock the full potential of the application and access additional modules, a simple modification to your ELM327 adapter is recommended. Instructions can be found here: [ttpp]

ELS27 adapters are available for purchase at: [yyxx]. For ELS27USB, set the baud rate to 38400; for ELS27BT, use the ELS27 Baudrate utility to set it to 2,000,000.